Flowrise Enterprise

Disc Check Valve Non Slam

Size Range 1/2″ to 8″
Body CF8 /CF8M
Disc S.S. 304 / S.S. 316
Disc Seat Metal to Metal / PTFE
Spring Standard
Max Oper. Press PN – 40
Max. Oper. Temp. Upto 300 °C

Pressure Reducing Valve (PRV)

Size 1/2″ to 2″
Ends Screwed / Flanged
Body S.S. 304 / S.S. 316
Press. Adjusting 1 ~ 6 Kg/cm²
4 ~ 10 Kg/cm²
20 ~ 35 Kg/cm²
Max. Inlet Press. 18 Kg/cm², 40 Kg/cm²
Media Water, Air, Gas, Oil & Steam
Temperature -15 °C ~ 85 °C, 220 °C

2/2 Way Brass Solenoid Valve

Body Forged Brass
Pressure 0.5 to 10 Bar
Temperature -10 to 90°C
Diaphragm Nitril, Virton, EPDM
Media Air, Water, Oil, Gas
Opet Voltage All std. voltage available
End Connection Screwed

Low Pressure Diaphragm Type Solenoid Valve

Type Normally Close / Open
Size Range 1/2″ to 2″
Body CF8
Seals Nitrile
Pressure 0 to 5 Bar
Temperature Upto 85 °C
Ends Screwed / Flanged
Media Air, Water, Oil, Gas, Vaccum
Available Volt. All std. voltage available

Diaphragm Type Solenoid Valve

Actuator Diaphragm type internal
pilot operated
Type Normally Close / Open
Size Range 1/2″ to 2″
Body CF8
Diaphragm Nitrile
Pressure 0.5 to 10 Bar
Temperature Upto 85 °C
Ends Screwed / Flanged
Media Alr, Water, Oil, Gas, Vaccum
Available Volt. All std. voltage available

Lug Type Knife Edge Gate Valve

Operation Pneumatic / Manual
Size Range 2″ to 20°
Valve Body CI / CS / CF8 / CF8M
Seals AISI SS 304 / 316
Gland Packing Metal to Metal / NRV
Leakage Class Cotton Graphite Rope
Ends IV to V

2/2 & 3/2 Way High Thermic Fluid Control Valve

Operation Diaphragm Type / Cylinder
Type Diaphragm Type Thermic
Fluid Control Valve
Size Range 1″ to 8″
Body & End Piece WCB/S.S
Diaphragm Nitrile Canvas Moulded
Diaphragm Cover Sheet, Metal, Pressing
Working Press. 150#
Working Temp. Upto 450°C
Seating Metal to Metal
Media Thermic Fluid